Show Ports Storm-Control - Alcatel OS-LS-6224 User Manual

4
Command Line Interface
Related Commands
port storm-control broadcast enable

show ports storm-control

show ports storm-control
The show ports storm-control User/Privileged EXEC mode command displays the
storm control configuration.
Syntax
show ports storm-control [interface]
Parameters
• interface — A valid Ethernet port. (Full syntax: unit/port)
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
Examples
The following example displays the storm control configuration.
Console# show ports storm-control
Port State
---- --------
1/e1 Enabled
2/e1 Enabled
3/e1 Disabled
The following example displays the storm control configuration.
Console# show ports storm-control
Unknown traffic limited to 1000 Kbits/sec
Port Broadcast and Multicast Storm Control [Kbits/Sec]
---- -------------------------------------------------
1/g1 8000
2/g1 Disabled
3/g1 Disabled
400
Rate [Kbits/Sec]
----------------
70
100
100
Included
--------------------------------------
Broadcast, Multicast, Unknown Unicast
Broadcast
Broadcast