dot1x timeout re-authperiod
dot1x timeout quiet-period
dot1x timeout tx-period
dot1x max-req
dot1x timeout supp-timeout
dot1x timeout server-timeout
show dot1x
show dot1x users
dot1x timeout re-authperiod
The dot1x timeout re-authperiod Interface Configuration mode command sets the
number of seconds between re-authentication attempts. To return to the default
configuration, use the no form of this command.
Syntax
dot1x timeout re-authperiod seconds
no dot1x timeout re-authperiod
Parameters
• seconds — Number of seconds between re-authentication attempts.
(Range: 300 - 4294967295)
Default Setting
Re-authentication period is 3600 seconds.
Command Mode
Interface Configuration (Ethernet) mode
Command Usage
There are no user guidelines for this command.
Example
The following example sets the number of seconds between re-authentication
attempts, to 300.
Console(config)# interface ethernet 1/e16
Console(config-if)# dot1x timeout re-authperiod 300
Related Commands
dot1x port-control
dot1x re-authentication
dot1x timeout quiet-period
dot1x timeout tx-period
802.1x Commands
273
4