Ip Address; Ip Addressing Commands - Alcatel OS-LS-6224 User Manual

4
Command Line Interface

IP Addressing Commands

Command

ip address

ip address dhcp
ip default-gateway
show ip interface
arp
arp timeout
clear arp-cache
show arp
ip domain-lookup
ip domain-name
ip name-server
ip host
clear host
clear host dhcp
show hosts
ip address
The ip address Interface Configuration (Ethernet, VLAN, port-channel) mode
command sets an IP address. To remove an IP address, use the no form of this
command.
424
Table 4-17. IP Addressing Commands
Function
Sets an IP address. To remove an IP address, use the no form of
this command.
Acquires an IP address for an Ethernet interface from the
Dynamic Host Configuration Protocol (DHCP) server. To
deconfigure an acquired IP address, use the no form of this
command.
Defines a default gateway (device). To return to the default
configuration, use the no form of this command.
Sets the interval that the system waits for a login attempt
Adds a permanent entry in the Address Resolution Protocol (ARP)
cache. To remove an entry from the ARP cache, use the no form
of this command.
Configures how long an entry remains in the ARP cache. To return
to the default configuration, use the no form of this command.
Deletes all dynamic entries from the ARP cache.
Displays entries in the ARP table.
Enables the IP Domain Naming System (DNS)-based host
name-to-address translation. To disable DNS-based host
name-to-address translation, use the no form of this command.
Defines a default domain name used by the software to complete
unqualified host names (names without a dotted-decimal domain
name). To remove the default domain name, use the no form of
this command.
Defines the available name servers. To remove a name server,
use the no form of this command.
Defines static host name-to-address mapping in the host cache.
To remove the name-to-address mapping, use the no form of this
command.
Deletes entries from the host name-to-address cache.
Deletes entries from the host name-to-address mapping received
from Dynamic Host Configuration Protocol (DHCP).
Displays the default domain name, a list of name server hosts, the
static and the cached list of host names and addresses.
Mode Page
IC 4-424
IC 4-425
GC 4-426
PE 4-427
GC 4-428
GC 4-429
PE 4-430
PE 4-430
GC 4-431
GC 4-432
GC 4-432
GC 4-433
PE 4-434
PE 4-435
PE 4-435