User Name; Snmp Community Strings - Alcatel OS-LS-6224 User Manual

To configure a static route, enter the command at the system prompt as shown in the
following configuration example where 101.1.1.2 is the specific management station:
configure
Console#
Console(config)#
Console(config-if)#
Console(config-if)#
Console(config)#
.
Gateway IP Address
Gateway IP Type
Address
10.7.1.1 Static
IP Address Interface
----------- -----------
10.7.1.192/24 VLAN1
10.7.2.192/24 VLAN2

User Name

A user name is used to manage the device remotely, for example through SSH,
Telnet, or the Web interface. To gain complete administrative (super-user) control
over the device, the highest privilege level 15 must be specified.
Note:
Only the administrator (super-user) with the highest privilege level (15) is allowed
to manage the device through the Web browser interface.
For more information about the privilege level, see the Command Line Interface.
The configured user name is entered as a login name for remote management
sessions. To configure user name and privilege level, enter the command at the
system prompt as shown in the configuration example:
Console> enable
configure
Console#
Console(config)# username admin password lee privilege 15

SNMP Community Strings

Simple Network Management Protocol (SNMP) provides a method for managing
network devices. Devices supporting SNMP run a local software (agent). The SNMP
agents maintain a list of variables, used to manage the device. The variables are
defined in the Management Information Base (MIB). The MIB presents the variables
controlled by the agent. The SNMP agent defines the MIB specification format, as
well as the format used to access the information over the network.
Access rights to the SNMP agents are controlled by access strings and SNMP
community strings.
The device is SNMP-compliant and contains an SNMP agent that supports a set of
standard and private MIB variables. Developers of management stations require the
interface vlan
ip address
100.1.1.1 255.255.255.0
exit
ip default-gateway
1
100.1.1.10
Activity Status
Active
Type
-------------
static
DHCP
Initial Configuration
4-676
4-424
4-668
4-426
2
19