Switchport Trunk Native Vlan - Alcatel OS-LS-6224 User Manual

Example
The following example adds VLANs 1, 2, 5 to 6 to the allowed list of Ethernet port 1/
e16.
Console(config)# interface ethernet 1/e16
Console(config-if)# switchport trunk allowed vlan add 1-2,5-6
Related Commands
switchport mode
switchport access vlan

switchport trunk native vlan

switchport general allowed vlan
switchport general pvid
switchport general ingress-filtering disable
switchport general acceptable-frame-type tagged-only
switchport forbidden vlan
show interfaces switchport
switchport access multicast-tv vlan
switchport trunk native vlan
The switchport trunk native vlan Interface Configuration mode command defines
the native VLAN when the interface is in trunk mode. To return to the default
configuration, use the no form of this command.
Syntax
switchport trunk native vlan vlan-id
no switchport trunk native vlan
Parameters
• vlan-id — Specifies the ID of the native VLAN.
Default Setting
VID=1.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Command Usage
The command adds the port as a member in the VLAN. If the port is already a
member in the VLAN (not as a native), it should be first removed from the
VLAN.
4
VLAN Commands
683