Viewing Device Health - Alcatel OS-LS-6224 User Manual

1/g2 OK
1/g3 Copper
Temp – Internally measured transceiver temperature.
Voltage - Internally measured supply voltage.
Current – Measured TX bias current.
Output Power – Measured TX output power.
Input Power – Measured RX
Tx Fault – Transmitter fault
LOS – Loss of signal
N/A - Not Available, N/S - Not Supported, W - Warning, E - Error

Viewing Device Health

The Health Page displays physical device information, including information about
the device's power and ventilation sources.
Command Attributes
• Unit No. — Indicates the stacking member for which the device information is
displayed.
• Power Supply Status — The power supply status. The device has two power
supplies. Power supply 1 is displayed as PS1 in the interface, while the redundant
power supply is displayed as RPS. The possible field values are:
• Checked — The power supply is operating normally.
• Unchecked —The power supply is not operating normally.
• Not Present —The power supply is currently not present.
• Fan Status — The fan status. The number of fans on the boards is provided based
on the device type (number of ports) and PoE chips availability. Each fan is
denoted as fan plus the fan number in the interface. The possible field values are:
• Checked — The fan is operating normally.
• Unchecked — The fan is not operating normally.
• Not Present — A fan is currently not present.
• Temperature — The temperature at which the device is currently running. The
device temperature is displayed in Celsius. The device temperature threshold is
0-40 C (32-104F). The following table displays the temperature in Fahrenheit in
increments of 5:
Table 1: Celsius to Fahrenheit Conversion Table
OK OK
received power.
Celsius Fahrenheit
32
0
5 41
10 50
15 59
Device Diagnostic Tests
OK OK
3
E OK
145