Alcatel OS-LS-6224 User Manual page 120

3
Configuring the Switch
Command Attributes
SNMPv1,2 Notification Recipient
• Recipients IP — Displays the IP address to which the traps are sent.
• Notification Type — Displays the notification sent. The possible field values are:
• Trap — Indicates traps are sent.
• Inform — Indicates informs are sent.
• Community String — Displays the community string of the trap manager.
• Notification Version — Displays the trap type. The possible field values are:
• SNMP V1 — Indicates that SNMP Version 1 traps are sent.
• SNMP V2c — Indicates that SNMP Version 2 traps are sent.
• UDP Port — Displays the UDP port used to send notifications. The default is 162.
• Filter Name — Indicates if the SNMP filter for which the SNMP Notification filter is
defined.
• Timeout — Indicates the amount of time (in seconds) the device waits before
re-sending informs. The default is 15 seconds.
• Retries — Indicates the amount of times the device re-sends an inform request.
The default is 3 seconds.
• Remove — Deletes the currently selected recipient. The possible field values are:
• Checked — Removes the selected recipient from the list of recipients.
• Unchecked — Maintains the list of recipients.
SNMPv3 Notification Recipient
• Recipient IP — Displays the IP address to which the traps are sent.
• Notification Type — Displays the type of notification sent. The possible field
values are:
• Trap — Indicates that traps are sent.
• Inform — Indicates that informs are sent.
• User Name — Displays the user to which SNMP notifications are sent.
• Security Level — Displays the means by which the packet is authenticated. The
possible field values are:
• No Authentication — Indicates that the packet is neither authenticated nor
encrypted.
• Authentication — Indicates that the packet is authenticated.
• Privacy — Encrypts SNMP messages.
• UDP Port — The UDP port used to send notifications. The field range is 1-65535.
The default is 162.
• Filter Name — Includes or excludes SNMP filters.
• Timeout — The amount of time (seconds) the device waits before resending
informs. The field range is 1-300. The default is 10 seconds.
• Retries — The amount of times the device resends an inform request. The field
range is 1-255. The default is 3.
96