Managing Rmon Statistics; Viewing Rmon Statistics - Alcatel OS-LS-6224 User Manual

3
Configuring the Switch

Managing RMON Statistics

RMON statistics provide access to a broad range of statistics, including a total count
of different frame types and sizes passing through each port. All values displayed
have been accumulated since the last system reboot.

Viewing RMON Statistics

The RMON Statistics Page contains fields for viewing information about device
utilization and errors that occurred on the device.
Command Attributes
• Unit No. — Displays the stacking member for which the Statistics Etherlike is
displayed.
• Interface — Indicates the interface for which statistics are displayed. The possible
field values are:
• Port — Defines the specific port for which RMON statistics are displayed.
• LAG — Defines the specific LAG for which RMON statistics are displayed.
• Refresh Rate — Defines the amount of time that passes before the interface
statistics are refreshed. The possible field values are:
• 15 Sec — Indicates that the RMON statistics are refreshed every 15 seconds.
• 30 Sec — Indicates that the RMON statistics are refreshed every 30 seconds.
• 60 Sec — Indicates that the RMON statistics are refreshed every 60 seconds.
• No Refresh — Indicates that the RMON statistics are not refreshed
automatically.
• Received Bytes (Octets) — Displays the number of octets received on the
interface since the device was last refreshed. This number includes bad packets
and FCS octets, but excludes framing bits.
• Received Packets — Displays the number of packets received on the interface,
including bad packets, Multicast and broadcast packets, since the device was last
refreshed.
• Broadcast Packets Received — Displays the number of good broadcast packets
received on the interface since the device was last refreshed. This number does
not include Multicast packets.
• Multicast Packets Received — Displays the number of good Multicast packets
received on the interface since the device was last refreshed.
• CRC & Align Errors — Displays the number of CRC and Align errors that have
occurred on the interface since the device was last refreshed.
• Undersize Packets — Displays the number of undersized packets (less than 64
octets) received on the interface since the device was last refreshed.
• Oversize Packets — Displays the number of oversized packets (over 1518 octets)
received on the interface since the device was last refreshed.
116