Management Access-Class - Alcatel OS-LS-6224 User Manual

deny ip-source ip-address [mask mask | prefix-length] [ethernet
interface-number | vlan vlan-id | port-channel port-channel-number |
[service service]
Parameters
• interface-number — A valid Ethernet port number.
• vlan-id — A valid VLAN number.
• port-channel-number — A valid port-channel number.
• ip-address — A valid source IP address.
• mask — A valid network mask of the source IP address.
• prefix-length — Specifies the number of bits that comprise the source IP
address prefix. The prefix length must be preceded by a forward slash
(/). (Range: 0-32)
• service — Service type. Possible values are:
telnet, ssh, http, https and snmp.
Default Setting
This command has no default configuration.
Command Mode
Management Access-list Configuration mode
Command Usage
Rules with Ethernet, VLAN and port-channel parameters are valid only if an IP
address is defined on the appropriate interface.
The system supports up to 128 management access rules.
Example
The following example denies all ports in the access list called mlist.
Console(config)# management access-list mlist
Console(config-macl)# deny
Related Commands
management access-list
permit (Management)
show management access-list

management access-class

The management access-class Global Configuration mode command restricts
management connections by defining the active management access list. To disable
this restriction, use the no form of this command.
Syntax
management access-class {console-only | name}
no management access-class
Management ACL Commands
4
459