Boot Module Commands; Command Interpreter Mode; Figure 14-12 Boot Module Commands - ZyXEL Communications Prestige 1600 Configuration Manual

14.5

Boot Module Commands

Prestige boot module commands are shown below. For ATBAx, x denotes the number preceding the colon to give
the speed following the colon in the list of numbers that follows; e.g. ATBA3 will give a baud of 9.6 Kbps. ATSE
displays the seed that is used to generate a password to turn on the debug flag in the firmware. The ATSH
command shows product related information such as boot module version, vendor name, product model, RAS code
revision, etc.
======= Debug Command Listing =======
athe
======= Debug Command Listing =======
AT
ATHE
ATBAx
4:57.6k 5:115.2k
ATENx(,y)
ATSE
ATTI(h,m,s)
current time
ATDA(y,m,d)
current date
ATDS
ATDT
ATDUx,y
length y
ATRBx
ATRBx
ATRWx
ATRLx
ATGOx
ATGR
ATGT
ATRTw,x,y(,z) RAM Test level w, from address x to y (z
iterations)
ATCB
ATSH
ATDOx,y
via XMODEM
ATTD
< press any key to continue >
ATUR
ATUR3
ATLC
ATLOa,b,c,d
ATGM
ATGB
ATUM
ATUB
ATSW
14.6

Command Interpreter Mode

This option allows you to enter the command line interpreter mode. A CLI/CI (Command Line Interface) is a user
interface to a computer's operating system or an application program in which the user responds to a visual prompt
by typing in a command on a specified line, receives a response back from the system, and then enters another
command, and so forth.
The list of valid commands can be found by typing help or ? at the command prompt. To exit the CI mode and
return to the menu mode, type exit.
System Information and Maintenance
just answer OK
print help
change baudrate. 1:38.4k, 2:19.2k, 3:9.6k
set BootExtension Debug Flag (y=password)
show the seed of password generator
change system time to hour:min:sec or show
change system date to year/month/day or show
dump RAS stack
dump Boot Module Common Area
dump memory contents from address x for
display the 8-bit value of address x
display the 8-bit value of address x
display the 16-bit value of address x
display the 32-bit value of address x
run program at addr x or boot ZyNOS
boot ZyNOS
run Hardware Test Program
copy from FLASH ROM to working buffer
dump manufacturer related data in ROM
download from address x for length y to PC
download configuration to PC via XMODEM
upload RAS code to flash ROM
upload RAS configuration file
upload RAS configuration file
Int/Trap Log Cmd
boot ZyNOS in main block
boot ZyNOS in backup block
upload RAS code to main block
upload RAS code to backup block
switch main block and backup block

Figure 14-12 Boot Module Commands

Prestige 1600 Universal Access Concentrator
14-9