MSAP2000 AAMS User's Guide
Sys Commands (continued)
Table 59
COMMAND
log
wdog
monitor
showall
25.2 Sys Command Examples
These are the commonly used commands that belong to the sys (system) group of
commands.
25.2.1 Info Show Command
Syntax:
ras> sys info show
sync
show
clear
show
set
<msec|0:disable>
show
enable
disable
vlimit
<idx> <high>
<low>
tlimit
<idx> <high>
<low>
[nopause]
156
DESCRIPTION
Retrieves the date and time from
the time server.
Displays the device's logs.
Clears the device's logs.
Displays the current watchdog
firmware protection feature status
and timer.
Sets the watchdog count. 0 turns the
watchdog off.
Displays the hardware monitor's
statistics.
Turns the hardware monitor on.
Turns the hardware monitor off.
Sets the maximum (<high>) or
minimum (<low>) voltage at the
specified voltage sensor. You can
specify a voltage with up to three
digits after a decimal point (0.941 for
example).
Normal voltage at each sensor: Idx:
1=1.0v, 2=1.8v, 3=3.3v, 4=2.4v
Sets the maximum (<high>) or
minimum (<low>) temperature at
the specified temperature sensor.
You can specify a temperature with
up to three digits after a decimal
point (-50.025 for example).
Temperature sensor locations: Idx:
1=DSL Line Driver, 2=DSL Chipset,
3=CPU
Displays all system-
related configuration.