Power Control Schedule; Figure 206 Maintenance > Power Management > Edit - ZyXEL Communications NSA-2401 User Manual

Chapter 11 Maintenance Screens
Table 106 Maintenance > Power Management (continued)
LABEL
Power On After Power
Failure
Keep Former Status
Always Power On
Always Power Off
Apply
Power On/Off Schedule
Enable Power Control
Schedule
Apply

11.6.1 Power Control Schedule

Click Maintenance > Power Management > Edit to open this screen, where you can
configure power control schedules to have the NSA turn on, turn off, or reboot at specified
times.
Figure 206 Maintenance > Power Management > Edit
242
DESCRIPTION
Select an option to set whether or not the NSA restarts when the power is
restored after a power failure.
Select this option to have the NSA automatically restart only if it was
operating when the power failed. The NSA remains off if it was already off
when the power failed.
Select this option to keep the NSA operating as much of the time as
possible. The NSA restarts automatically even if it was turned off when
the power failed.
Select this option to keep the NSA from automatically restarting when the
power is restored after a power failure. This is a computer's "traditional"
behavior. Select this if you have other servers such as a domain controller
or DNS server that you want to start or check after a power failure before
the NSA turns on.
Click this to save your changes in this section.
Select this option to have the NSA turn itself off and on or reboot
according to the schedules you configure.
Click Edit to go to the screen where you can configure the power control
schedules.
Click this to save your changes in this section.
NSA-2401 User's Guide