Table of Contents
Advertisement
MSAP2000 AAMS User's Guide
This chapter explains how to set the syslog parameters.
17.1 Syslog
The syslog feature sends logs to an external syslog server.
17.2 Syslog Setup
Click Advanced Application and then SysLog in the navigation panel to
display the screen shown next.
Figure 53
The following table describes the labels in this screen.
Table 41
LABEL
Enable UNIX
Syslog
SysLog Server IP
Log Facility
Apply
Cancel
Syslog
Syslog
DESCRIPTION
Select this check box to activate syslog (system logging) and then
configure the syslog parameters described in the following fields.
Enter the IP address of the syslog server.
Select an option from the drop-down list box. The log facility allows you to log
the message to different files in the server. Please refer to the documentation
of your syslog program for more details.
Click Apply to save your changes to the MSAP2000 AAMS's volatile memory.
The MSAP2000 AAMS loses these changes if it is turned off or loses power, so
use the Config Save link on the navigation panel to save your changes to the
non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
C
H A P T E R
Syslog
114
1 7
Advertisement
Table of Contents
