Dhcp Table Screen; Figure 11 Home > Show Statistics; Table 8 Home > Show Statistics - ZyXEL Communications ZYWALL P1 User Manual

Figure 11 HOME > Show Statistics
The following table describes the labels in this screen.
Table 8 HOME > Show Statistics
LABEL
Port
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
System Up Time This is the total time the ZyWALL has been on.
Automatic
Refresh Interval
Refresh

2.3.8 DHCP Table Screen

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual
clients to obtain TCP/IP configuration at start-up from a server. You can configure the
ZyWALL as a DHCP server or disable it. When configured as a server, the ZyWALL provides
the TCP/IP configuration for the clients. If DHCP service is disabled, you must have another
DHCP server on your LAN, or else the computer must be manually configured.
Click Show DHCP Table in the HOME screen when the ZyWALL is set to router mode.
Read-only information here relates to your DHCP status. The DHCP table shows current
DHCP client information (including IP Address, Host Name and MAC Address) of all
network clients using the ZyWALL's DHCP server.
ZyWALL P1 User's Guide
DESCRIPTION
These are the ZyWALL's interfaces.
This is the number of transmitted packets on this port.
This is the number of received packets on this port.
This is the number of collisions on this port.
This displays the transmission speed in bytes per second on this port.
This displays the reception speed in bytes per second on this port.
This is the total amount of time the line has been up.
Select a number of seconds or None from the drop-down list box to update all
screen statistics automatically at the end of every time interval or to not update the
screen statistics.
Click this button to update the screen's statistics immediately.
Chapter 2 Introducing the Web Configurator
57