Renault Laguna III Manual page 3049

Table of Contents

Advertisement

AIR BAG AND PRETENSIONERS
Rear side seat belt: Removal - Refitting
D91
a Unlock the connector from the rear side seat belt in-
ertia reel.
a Disconnect the connector (7) of the rear side seat
belt inertia reel.
a Remove:
- the bolt (8) of the rear side seat belt inertia reel,
- the rear side seat belt (9) .
REFITTING
I - REFITTING PREPARATION OPERATION
a
IMPORTANT
After a seat belt pyrotechnic component is trig-
gered, it is essential to replace certain parts (see
88C, Air bag and Pretensioners, Airbag and
pretensioners: Precautions for the repair,
page 88C-7) .
a parts always to be replaced: Rear side seat belt
(31,02,01,24).
II - REFITTING OPERATION FOR PART
CONCERNED
101920
a Refit the rear side seat belt.
a Torque tighten the rear side seat belt inertia reel
bolt (21 N.m).
a Connect the rear side seat belt inertia reel connec-
tor.
a Lock the connector on the rear side seat belt inertia
reel.
a Clip the strap.
a Refit the plastic cover.
a Pass the strap through the rear side seat belt return
mechanism.
a Torque tighten the bolt of the rear side seat belt
fitting (21 N.m).
III - FINAL OPERATION
134402
a Refit:
- the rear side trim (see Rear panel lining: Remov-
al - Refitting) (71A, Body internal trim),
- the side section (see Side section: Removal - Re-
fitting) (76A, Rear seat frames and runners),
- the rear bench seat base (see Rear bench seat
base: Removal - Refitting) (76A, Rear seat
frames and runners).
88C-48
88C

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents