Renault Laguna III Manual page 3046

AIR BAG AND PRETENSIONERS
Rear side seat belt: Removal - Refitting
B91 or K91
a Remove the bolt from the rear side seat belt fitting
(4) .
a Remove:
- the rear side seat belt bolt (5) ,
- the rear side seat belt.
REFITTING
I - REFITTING PREPARATION OPERATION
a
IMPORTANT
After a seat belt pyrotechnic component is trig-
gered, it is essential to replace certain parts (see
88C, Air bag and Pretensioners, Airbag and
pretensioners: Precautions for the repair,
page 88C-7) .
a parts always to be replaced: Rear seat belt iner-
tia reel bolt (31,02,01,50).
a Always replace the bolt of the rear side seat belt fit-
ting.
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
124018
- the rear side seat belt,
- a new rear side seat belt bolt.
a Torque tighten the rear side seat belt bolt (21
N.m).
a Refit a new bolt for the rear side seat belt fitting.
a Torque tighten the bolt of the rear side seat belt
fitting (44 N.m).
a Connect the rear side seat belt connector.
a Lock the rear side seat belt connector.
a Refit the rear side seat belt protective foam.
III - FINAL OPERATION
a Refit:
- the rear bench seat base (see Rear bench seat
base: Removal - Refitting) (76A, Rear seat
frames and runners),
- the rear parcel shelf trim (see Rear parcel shelf
125386
trim: Removal - Refitting) (71A, Body internal
trim).
88C-45
88C