D-Link DGS-1510 Series Reference Manual page 89

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Switch#configure terminal
Switch(config)# ip arp spoofing-prevention 10.254.254.251 00-00-00-11-11-11
interface eth2/0/10
Switch(config)# ip arp spoofing-prevention 10.254.254.251 00-00-00-11-11-11
interface port-channel 3
Switch(config)#
6-2 show ip arp spoofing-prevention
This command is used to display the configuration of ARP spoofing prevention.
show ip arp spoofing-prevention
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display all ARP spoofing prevention entries.
Example
This example shows how to display all ARP spoofing prevention entries.
Switch# show ip arp spoofing-prevention
IP
--------------- ----------------- ---------------------------
10.254.254.251
Total Entries: 1
Switch#
Display Parameters
IP
MAC
Interfaces
MAC Interfaces
00-00-00-11-11-11 eth2/0/10
The IP address of the gateway.
The MAC address of the gateway.
The interfaces on which the ARP spoofing prevention is active.
86