D-Link DGS-1510 Series Reference Manual page 637

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
HOURS-OFFSET
MINUTES-OFFSET
Default
By default, this option is set to UTC.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
The time obtained by the SNTP server refers to the UTC time. The local time will be calculated based
on UTC time, time zone, and the daylight saving configuration.
Example
This example shows how to set the time zone to the Pacific Standard Time (PST), which is 8 hours
ahead of UTC.
Switch# configure terminal
Switch(config)# clock timezone - 8
Switch(config)#
72-4 show clock
This command is used to display the time and date information.
show clock
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command also indicates the clock's source. The clock source can be "No Time Source" or
"SNTP".
Example
This example shows how to display the current time.
Specifies the hours difference from UTC.
(Optional) Specifies the minutes difference from UTC.
634