D-Link DGS-1510 Series Reference Manual page 564

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Switch# show snmp group
GroupName: public
ReadView
NotifyView
IP access control list:
GroupName: public
ReadView
NotifyView
IP access control list:
GroupName: initial
ReadView
NotifyView
IP access control list:
GroupName: private
ReadView
NotifyView
IP access control list:
GroupName: private
ReadView
NotifyView
IP access control list:
Total Entries: 5
Switch#
This example shows how to display the SNMP engine ID.
Switch# show snmp engineID
Local SNMP engineID: 00000009020000000C025808
Switch#
63-15 show snmp user
This command is used to display information about the configured SNMP user.
show snmp user [USER-NAME]
Parameters
USER-NAME
Default
None.
Command Mode
Privileged EXEC Mode or Any Configuration Mode.
: CommunityView
: CommunityView
: CommunityView
: CommunityView
: restricted
: restricted
: CommunityView
: CommunityView
: CommunityView
: CommunityView
(Optional) Specifies the name of a specific user to display SNMP
information.
561
SecurityModel: v1
WriteView :
SecurityModel: v2c
WriteView :
SecurityModel: v3/noauth
WriteView :
SecurityModel: v1
WriteView : CommunityView
SecurityModel: v2c
WriteView : CommunityView