D-Link DGS-1510 Series Reference Manual page 255

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
FILE-URL
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to display the contents of a file in the file system. The command is usually used to
display text files. If the content of a file contains non-standard printable characters, the display will
feature unreadable characters or even blank spaces.
Example
This example shows how to display the contents of file "usr_def.conf".
Switch# more
!DGS-1510
!Firmware Version:1.30.003
!Slot
!------ ------------------
! 1
! 2
! 3
! 4
!
ip igmp snooping vlan 1
!.
end
Switch#
29-6 rename
This command is used to rename a file.
rename FILE-URL1 FILE-URL2
Parameters
FILE-URL1
FILE-URL2
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Specifies the URL for the file to be displayed.
/c:/configuration/usr_def.conf
Model
DGS-1510-28P
-
DGS-1510-28P
DGS-1510-28P
Specifies the URL for the file to be renamed.
Specifies the URL after file renaming.
252