D-Link DGS-1510 Series Reference Manual page 436

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
successfully authenticated the supplicant.
ABORTING: Indicates that the authentication procedure is being
prematurely aborted due to the receipt of a re-authentication
request, an EAPOL-Start frame, an EAPOL-Logoff frame, or an
authentication timeout.
HELD: Indicates that the state machine ignores and discards all
EAPOL packets in order to discourage brute force attacks. This
state is entered from the AUTHENTICATING state following an
authentication failure.
FORCE_AUTH: Indicates that the supplicant is always authorized.
FORCE_UNAUTH: Indicates that the supplicant is always
unauthorized.
Indicates the 802.1X backend PAE state. It can be one of the
802.1X Backend State
following values:
REQUEST: Indicates that the state machine has received an EAP
request packet from the authentication server and is relaying that
packet to the Supplicant as an EAPOL-encapsulated frame.
RESPONSE: Indicates that the state machine has received an
EAPOL-encapsulated EAP Response packet from the supplicant
and is relaying the EAP packet to the authentication Server.
SUCCESS: Indicates that the authentication server has confirmed
that the supplicant is a legal client. The backend state machine will
notify the authenticator PAE state machine and the supplicant.
FAIL: Indicates that the authentication server has confirmed the
supplicant is an illegal client. The backend state machine will notify
the authenticator PAE state machine and the supplicant.
TIMEOUT: Indicates that the authentication server or supplicant has
time out.
IDLE: In this state, the state machine is waiting for the Authenticator
state machine to signal the start of a new authentication session.
INITIALIZE: Indicates the authenticator is initializing the state
machine.
433