D-Link DGS-1510 Series Reference Manual page 321

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
show ip forward-protocol udp
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to show all specified UDP ports.
Example
This example shows how to display all specified UDP ports.
Switch#show ip forward-protocol udp
Application
--------------------
Time Service
IEN-116 Name Service
TACACS
TFTP
NetBIOS-NS
NetBIOS-DS
Switch#
UDP Port
---------------
37
42
49
69
137
138
318