D-Link DGS-1510 Series Reference Manual page 375

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Switch#show lldp local interface ethernet 1/0/1 brief
Port ID: eth1/0/1
-----------------------------------------------------------------------------
Port ID Subtype
Port ID
Port Description
Switch#
43-23 show lldp management-address
This command is used to display the management address information.
show lldp management-address [IP-ADDRESS | IPV6-ADDRESS]
Parameters
IP-ADDRESS
IPV6-ADDRESS
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the management address information.
Example
This example shows how to display all management address information.
: Local
: eth1/0/1
: D-Link Corporation DGS-1510-28XMP
1.30.003 Port 1 on Unit 1
(Optional) Specifies to display the LLDP management information
for a specific IPv4 address.
(Optional) Specifies to display the LLDP management information
for a specific IPv6 address.
372