D-Link DGS-1510 Series Reference Manual page 578

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Level: 12.
Usage Guideline
This command can be used on Commander Switch to upload files to the server from member
switches. In order to distinguish the different member switch's ID, the file name will be appended to
the member switch's ID.
Example
This example shows how to download firmware to the member switch 1.
Switch# copy sim tftp://10.10.10.58/switch.had firmware member 1
Download firmware 10.10.10.58/ switch.had to member 1 ?(y/n)[n] y
Download Status:
ID MAC Address
---------------------------------------
1 00-02-01-03-01-03 SUCCESS
Switch#
This example shows how to upload the system log from the member switch 1.
Switch# copy sim system-log tftp: //10.10.10.58/switchlog member 1
Upload system log
Upload Status
ID MAC Address
---------------------------------------
1 00-02-01-03-01-03 SUCCESS
Switch#
64-9 snmp-server enable traps sim
This command is used to enable sending single IP management trap. Use the no form of this
command to disable sending single IP management trap.
snmp-server enable traps sim
no snmp-server enable traps sim
Parameters
None.
Default
By default, this option is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to enable sending single IP management trap.
Example
Status
from member 1 to 10.10.10.58/switchlog ?(y/n)[n]y
Status
575