D-Link DGS-1510 Series Reference Manual page 70

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Default
By default, the string is the same as the SNMP server name.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to customize the CLI prompt.
If the user selects to encode the SNMP server name as the prompt, only the first 15 characters are
encoded.
The privileged level character will appear as the last character of the prompt. The character is defined
as follows.

> - Represents user level.

# - Represents privileged user level.
Example
This example shows how to change the prompt to "BRANCH A".
Switch#configure terminal
Switch(config)#prompt BRANCH%sA
BRANCH A(config)#
This example shows how to set the command prompt back to the default setting.
BRANCH A#configure terminal
BRANCH A(config)#no prompt
Switch(config)#
5-3 enable password
This command is used to setup enable password to enter different privileged levels. Use the no form
of this command to return the password to the empty string.
enable password [level PRIVILEGE-LEVEL] [0| 7 | 15] PASSWORD
no enable password [level PRIVILEGE-LEVEL]
Parameters
level PRIVILEGE-LEVEL
0 PASSWORD
space character in the string is ignored.

% h - Specifies to encode the SNMP server name.

%s - Specifies to have space.

%% - Specifies to encode the % symbol.
Specifies the privilege level for the user. The privilege level is
between 1 and 15. If this argument is not specified in the command
or the no form of the command, the privilege level defaults to 15
(traditional enable privileges).
Specifies the password the user must enter to gain access to the
Switch. The password can contain embedded spaces. The
password is case-sensitive. This is the default option. The plain-text
password maximum length is 32. (The range is 1-32)
67