D-Link DGS-1510 Series Reference Manual page 101

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Usage Guideline
Use this command to enter the TACACS+ group server configuration mode. Use the server command
to associate the TACACS+ server hosts with the TACACS+ server group. The defined server group
can be specified as the method list for authentication, or accounting by using the AAA authentication
and AAA accounting command.
Example
This example shows how to create a TACACS+ server group with two entries.
Switch#configure terminal
Switch(config)#aaa group server tacacs+ group1
Switch(config-sg-tacacs+)# server 172.19.10.100
Switch(config-sg-tacacs+)# server 172.19.11.20
Switch(config-sg-tacacs+)# exit
Switch(config)#
8-13 aaa new-model
This command is used to enable AAA for the authentication or accounting function. Use the no form
of this command to disable the AAA function.
aaa new-model
no aaa new-model
Parameters
None.
Default
By default, this feature is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to enable AAA before the authentication and accounting via the AAA method lists
take effect. If AAA is disabled, the login user will be authenticated via the local user account table
created by the username command. The enable password will be authenticated via the local table
which is defined via the enable password command.
Example
This example shows how to enable the AAA function.
Switch#configure terminal
Switch(config)# aaa new-model
Switch(config)#
8-14 accounting commands
This command is used to configure the method list used for command accounting via a specific line.
Use the no form of this command to disable do accounting command.
98