D-Link DGS-1510 Series Reference Manual page 21

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
2-11 show environment
This command is used to display fan, temperature, power availability and status information.
show environment [fan | power | temperature]
Parameters
fan
power
temperature
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
If the type is not specified, all types of environment information will be displayed.
Example
This example shows how to display fan, temperature, power availability and status information.
Switch#show environment
Detail Temperature Status:
Unit
----- ------------------------------------------------------
1
Status code: * temperature is out of threshold range
Detail Fan Status:
--------------------------------------------------------------
Right Fan 1 (OK)
Detail Power Status:
Unit Power Module
----- ----------------
1 Power 1
Switch#
Display Parameters
Power status
(Optional) Specifies to display the Switch fan detailed status.
(Optional) Specifies to display the Switch power detailed status.
(Optional) Specifies to display the Switch temperature detailed
status.
Temperature Descr/ID
Central Temperature/1
Right Fan 2 (OK)
Power Status
-------------
in-operation
in-operation: The power rectifier is in normal operation.
failed: The power rectifier not working normally.
empty: The power rectifier is not installed.
Current/Threshold Range
27C/11~79C
18