D-Link DGS-1510 Series Reference Manual page 673

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
server-ip: It indicates the AAA server IP address.
username: It indicates the username for authentication.
Event description: This log will be generated when RADIUS assigned a valid
VLAN ID attributes.
Log Message: RADIUS server <server-ip> assigned VID: <vid> to port
<interface-id> (Username: <username>)
Parameters description:
server-ip: It indicates the RADIUS server IP address.
vid: The assign VLAN ID that authorized by from RADIUS server.
interface–id: It indicates the port number of the client authenticated.
Username: It indicates the username for authentication.
Event description: This log will be generated when RADIUS assigned a valid
bandwidth attributes.
Log Message: RADIUS server <server-ip> assigned <direction> bandwidth:
<threshold> to port < interface -id> (Username: <username>)
Parameters description:
server-ip: It indicates the RADIUS server IP address.
Direction: It indicates the direction for bandwidth control, e.g.: ingress
or egress.
Threshold: The assign threshold of bandwidth that authorized by from
RADIUS server.
interface–id: It indicates the port number of the client authenticated.
Username: It indicates the username for authentication.
Event description: This log will be generated when RADIUS assigned a valid
priority attributes.
Log Message: RADIUS server <server-ip> assigned 802.1p default priority:
<priority> to port < interface -id> (Username: <username>)
Parameters description:
server-ip: It indicates the RADIUS server IP address.
priority: The assign priority that authorized by from RADIUS server.
interface–id: It indicates the port number of the client authenticated.
Username: It indicates the username for authentication.
Event description: This log will be generated when RADIUS assigned ACL
script but fails to apply to the system due to insufficient resource.
Log Message: RADIUS server <server-ip> assigns <username> ACL failure at
port < interface -id> (<acl-script>)
Parameters description:
server-ip: It indicates the RADIUS server IP address.
username: It indicates the username for authentication.
interface-id: It indicates the port number of the client authenticated.
acl-script: The assign ACL script that authorized by from RADIUS
server.
Auto Save Configuration
Log Description
Event description: Record the event when the configure information of ddp is
saved automatically.
Log Message:CONFIG-6-DDPSAVECONFIG: [Unit <unitID>, ]Configuration
automatically saved to flash due to configuring from DDP(Username:
<username>, IP: <ipaddr>)
Parameters description:
Unit: Box ID
670
Informational
Informational
Informational
Warning
Severity
Informational