D-Link DGS-1510 Series Reference Manual page 638

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Switch# show clock
Current Time Source
Current Time
Time Zone
Daylight Saving Time : Recurring
Offset in Minutes
Recurring From
Switch#
72-5 show sntp
This command is used to display information about the SNTP server.
show sntp
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display information about the SNTP server.
Example
This example shows how to display SNTP information.
Switch# show sntp
SNTP Status
SNTP Pool Interval
SNTP Server Status:
SNTP Server
---------------------------------------------- ------- ------- ---------------
10.0.0.11
10.0.0.12
10::2
FE80::1111vlan1
---------------------------------------------- ------- ------- ---------------
Total Entries:4
Switch#
: SNTP
: 18:20:04, 2014-07-04
: UTC +02:30
: 30
: Apr 2nd Tue 15:00
To : Oct 2nd Wed 15:30
:Enabled
: 720 seconds
Stratum Version Last Receive
8
7
------- ------- ---------------
------- ------- ---------------
635
4 00:02:02
4 00:01:02 Synced