D-Link DGS-1510 Series Reference Manual page 244

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
This example shows how to configure the ring MEL value of ERP instance 1 as 6.
Switch#configure terminal
Switch(config)#ethernet ring g8032 ring2
Switch(config-erp)#instance 1
Switch(config-erp-instance)#level 6
Switch(config-erp-instance)#
28-9 sub-ring
This command is used to specify the sub-ring of a physical ring. Use the no form of this command to
remove the specified sub-ring of a physical ring.
sub-ring SUB-RING-NAME
no sub-ring SUB-RING-NAME
Parameters
SUB-RING-NAME
Default
None.
Command Mode
ERP Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to specify or delete the sub-ring of a physical ring.
Example
This example shows how to configure the sub-ring of the physical ring "ring2".
Switch#configure terminal
Switch(config)#ethernet ring g8032 ring2
Switch(config-erp)#sub-ring ring1
Switch(config-erp)#
28-10 profile
This command is used to associate an ERP instance with a G.8032 profile. Use the no form of this
command to remove the association
profile PROFILE-NAME
no profile PROFILE-NAME
Parameters
PROFILE-NAME
Default
Specifies the name of the sub-ring.
Specifies the profile name to be associated with the ERP instance.
241