D-Link DGS-1510 Series Reference Manual page 63

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
interface INTERFACE-ID
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
If interface is not specified, all of the interfaces that have access list configured will be displayed.
Example
This example shows how to display access lists that are applied to all of the interfaces.
Switch# show access-group
eth1/0/1:
Inbound mac access-list : simple-mac-acl(ID: 7998)
Inbound ip access-list
Switch#
4-22 show access-list
This command is used to display the access list configuration information.
show access-list [ip [NAME | NUMBER] | mac [NAME | NUMBER] | ipv6 [NAME | NUMBER] |
expert [NAME | NUMBER] | arp [NAME]]
Parameters
ip
mac
ipv6
expert
NAME | NUMBER
arp
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays access list information. If no option is specified, a listing of all configured
access lists is displayed. If the type of access list is specified, detailed information of the access list
(Optional) Specifies the interface to be displayed.
: simple-ip-acl(ID: 1998)
(Optional) Specifies to display a listing of all IP access lists.
(Optional) Specifies to display a listing of all MAC access lists.
(Optional) Specifies to display a listing of all IPv6 access lists.
(Optional) Specifies to display a listing of all expert access lists.
Specifies to display the contents of the specified access list.
Specifies to display the ARP access list.
60