D-Link DGS-1510 Series Reference Manual page 224

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Level: 12.
Usage Guideline
Use this command to clear the ARP inspection log buffer.
Example
This example shows how to clear the inspection log.
Switch# clear ip arp inspection log
Switch#
26-3 clear ip arp inspection statistics
This command is used to clear the dynamic ARP inspection statistics.
clear ip arp inspection statistics {all | vlan VLAN-ID [,|-]}
Parameters
vlan VLAN-ID
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to clear the Dynamic ARP Inspection (DAI) statistics.
Example
This example shows how to clear the DAI statistics from VLAN 1.
Switch# clear ip arp inspection statistics vlan 1
Switch#
26-4 ip arp inspection filter vlan
This command is used to specify an ARP access list to be used for ARP inspection checks for the
VLAN. Use the no form of this command to remove the specification.
ip arp inspection filter ARP-ACL-NAME vlan VLAN-ID [, | -] [static]
no ip arp inspection filter ARP-ACL-NAME vlan VLAN-ID [, | -] [static]
Parameters
ARP-ACL-NAME
vlan VLAN-ID
,
(Optional) Specifies the VLAN or range of VLANs.
Specifies the access control list name with a maximum of 32
characters.
Specifies the VLAN associated with the ARP access list.
(Optional) Specifies a series of interfaces, or separate a range of
221