D-Link DGS-1510 Series Reference Manual page 536

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
TCP-PORT
Default
By default, this value is 22.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
This command configures the TCP port number for SSH server.
Example
This example shows how to change the service port number to 3000.
Switch# configure terminal
Switch(config)# ip ssh service-port 3000
Switch(config)#
60-6 show crypto key mypubkey
This command is used to display the RSA or DSA public key pairs.
show crypto key mypubkey {rsa | dsa}
Parameters
rsa
dsa
Default
None.
Command Mode
Privileged EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
This command displays the RSA or DSA public key pairs.
Example
This example shows how to information regarding the RSA public key.
Specifies the TCP port number. TCP ports are numbered between 1
and 65535. The "well-known" TCP port for the SSH protocol is 22.
Specifies to display information regarding the RSA public key.
Specifies to display information regarding the DSA public key.
533