D-Link DGS-1510 Series Reference Manual page 509

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Switch# show mls qos interface eth1/0/1 map dscp-cos
eth1/0/1
0 1 2
--------------------------------
00 00 00 00 00 00 00 00 00 01 01
10 01 01 01 01 01 01 02 02 02 02
20 02 02 02 02 03 03 03 03 03 01
30 03 03 04 04 04 04 04 04 04 04
40 05 05 05 05 05 05 05 05 06 06
50 06 06 06 06 06 06 07 07 07 07
60 07 07 07 07
Switch#
56-25 show mls qos map dscp-mutation
This command is used to display the QoS DSCP mutation map configuration.
show mls qos map dscp-mutation [MAP-NAME]
Parameters
MAP-NAME
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the QoS DSCP mutation map configuration.
Example
This example shows how to display the global DSCP mutation map.
3 4 5 6 7 8 9
(Optional) Specifies the name of the DSCP mutation map to be
displayed.
506