D-Link DGS-1510 Series Reference Manual page 694

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Event description: Login failed through Web (SSL).
Log Message: Login failed through Web (SSL) (Username: <username>, IP:
<ipaddr>).
Parameters description:
username: The use name that used to login SSL server.
ipaddr: The IP address of SSL client.
Event description: Web (SSL) session timed out.
Log Message: Web (SSL) session timed out (Username: <username>, IP:
<ipaddr>).
Parameters description:
username: The use name that used to login SSL server.
ipaddr: The IP address of SSL client.
Event description: Logout through Web(SSL).
Log Message: Logout through Web(SSL) (Username: <username>, IP:
<ipaddr>).
Parameters description:
username: The use name that used to login SSL server.
ipaddr: The IP address of SSL client.
Web-Authentication
Log Description
Event description: When a host has passed the authentication.
Log Message: Web-Authentication host login success (Username: <string>, IP:
<ipaddr | ipv6address>, MAC: <mac-address>, <interface-id>, VID: <vlan-id>)
Parameters description:
Username: The host username.
IP: The host IP address
mac-address: The host MAC addresses.
interface-id: The interface on which the host is authenticated.
vlan-id: The VLAN ID on which the host exists.
Event description: When a host fail to pass the authentication.
Log Message: Web-Authentication host login fail (Username: <string>, IP:
<ipaddr | ipv6address>, MAC: <mac-address>, <interface-id>, VID: <vlan-id>).
Parameters description:
Username: The host username.
IP: The host IP address
mac-address: The host MAC addresses..
interface-id: The interface on which the host is authenticated.
vlan-id: The VLAN ID on which the host exists.
Event description: when the authorized user number on the whole device has
reached the maximum user limit.
Log Message: Web-Authentication enters stop learning state.
Event description: when the authorized user number on the whole device is
below the maximum user limit in a time interval.
Log Message: Web-Authentication recovers from stop learning state.
Event description: when the ACL hardware resource is exhausted..
Log Message: Web-Authentication cannot work correctly because ACL rule
resource is not available.
691
Warning
Informational
Informational
Severity
Informational
Critical
Warning
Warning
Alert