D-Link DGS-1510 Series Reference Manual page 668

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
STRING
Default
By default, the Web authentication logout page is displayed.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to specify the Web page to display to the hosts who passes the Web
authentication.
Example
This example shows how to configure the default redirect path to be "http://www.website.com" after
passing Web authentication.
Switch# configure terminal
Switch(config)# web-auth success redirect-path http://www.website.com
Switch(config)#
77-4 web-auth system-auth-control
This command is used to enable the Web authentication function globally on the Switch. Use the no
form of this command to disable the Web authentication function globally on the Switch.
web-auth system-auth-control
no web-auth system-auth-control
Parameters
None.
Default
By default, this option is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Web authentication is a feature designed to authenticate a user by using the Web browser when the
user is trying to access the Internet via the Switch. The Switch itself can be the authentication server
and do the authentication based on a local database or be a RADIUS client and perform the
authentication process via RADIUS protocol with remote RADIUS server. The authentication process
uses either the HTTP or HTTPS protocol.
Example
This example shows how to enable the Web authentication function globally on the Switch.
Specifies the default URL the client Web browser will be redirected
to after successful authentication. If no default redirect URL is
specified, the Web authentication logout page will be displayed. The
default redirect path can be up to 128 characters.
665