D-Link DGS-1510 Series Reference Manual page 250

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
WTR timer
TC Propagation / No TC
Propagation
Revertive / Non-Revertive
Instance State
Admin/Operational RPL
Admin/Operational
Port0/port1
Admin/Operational RPL Port
Ring port0/port1 state
Profile
Inst ID
RingType
Node Type
Status
Port-State
28-16 activate
This command is used to activate the specified ERP instance. Use the no form of this command to
deactivate the specified ERP instance.
activate
no activate
Parameters
None.
Default
By default, this option is no activate.
Command Mode
ERP Instance Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to activate or deactivate the specified ERP instance. The ring ports, APS
channel, and ERP profile must be configured before activating the ERP instance.
Time value for WTR timer of the profile
TC is propagated or not propagated in the profile
Ring instances is operated in revertively or non revertively in the
profile.
Current ring node status of ERP instance. Deactivated / Init / Idle /
Protection
Current config/running config ring node role of ERPS instance.
(Owner /None)
Current config/running config ring port role. (Interface_id /none)
Current config/running RPL. (port0/port1 /none)
State for ring ports of ERP instance. ( - / Forwarding / Blocked l)
The profile associated with the ring instances.
Instance identifier of ERP instance.
Indicates either major ring or sub ring.
RPL Owner.
Current status of ERP instance. It can be one of the following
values:
Deactivated: The ERP instance is deactivated.
Init: The instance is initializing.
Idle: The instance is in normal state. The RPL port is blocked.
Protection: The instance detects failure at some ring port. The
RPL port is restored to protect the port.
Current ring ports state. (- / Forwarding / Blocked )
247