D-Link DGS-1510 Series Reference Manual page 478

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the best routes that are currently at work.
Example
This example shows how to display the routing table.
Switch#show ip route
Code: C - connected, S - static
* - candidate default
Gateway of last resort is not set
C 10.0.0.0/8 is directly connected, vlan1
Total Entries: 1
Switch#
55-4 show ip route summary
This command is used to display the brief information for the working routing entries.
show ip route summary
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the brief information for the working routing entries.
Example
This example shows how to display the IP route entries.
475