D-Link DGS-1510 Series Reference Manual page 377

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Example
This example shows how to display information about neighboring devices learned by LLDP on
eth4/0/9 in detailed mode.
Switch# show lldp neighbor interface eth4/0/9 detail
Port ID : eth4/0/9
-------------------------------------------------------------------------------
Remote Entities Count : 1
Entity 1
Chassis ID Subtype
Chassis ID
Port ID Subtype
Port ID
Port Description
System Name
System Description
System Capabilities Supported
System Capabilities Enabled
Management Address Count
(None)
Port VLAN ID
PPVID Entries Count
(None)
VLAN Name Entries Count
(None)
Protocol ID Entries Count
(None)
MAC/PHY Configuration/Status
Power Via MDI
Link Aggregation
Maximum Frame Size
Unknown TLVs Count
(None)
LLDP-MED capabilities
LLDP-MED device class
LLDP-MED capabilities support
LLDP-MED capabilities enabled
Extended power via MDI
Network policy
Application type
VLAN ID
Priority
DSCP
Unknown
LLDP-MED capabilities
Network Policy
Location identification
Extended power via MDI
Inventory
LLDP-MED capabilities
Network Policy
Location identification
Extended power via MDI
Inventory
Power device type
Power Source
Power request
: MAC Address
: 00-01-02-03-04-05
: Local
: eth1/0/5
: RMON Port
: Switch1
: Stackable Ethernet Switch
: Repeater, Bridge
: Repeater, Bridge
: 0
: 0
: 0
: 0
: 0
: (None)
: (None)
: (None)
: 0
: 0
:
: Endpoint device class III
:
: Support
: Support
: Not Support
: Support
: Support
:
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
:
: PD device
: from PSE
: 8 watts
:
: Voice
: -
: -
: -
: True
374