D-Link DGS-1510 Series Reference Manual page 642

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Parameters
NAME
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
If the name is not specified, all configured time-range profiles will be displayed.
Example
This example shows how to display all the configured time ranges.
Switch#show time-range
Time Range Profile: rdtime
Daily 09:00 to 12:00
Weekly Saturday 00:00 to Monday 00:00
Time Range Profile: lunchtime
Daily 12:00 to 13:00
Total Entries: 2
Switch#
73-3 time-range
This command is used to enter the time range configuration mode to define a time range. Use the no
form of this command to delete a time range.
time-range NAME
no time-range NAME
Parameters
NAME
Default
None.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
(Optional) Specifies the name of the time-range profile to be
displayed.
Specifies the name of the time-range profile to be configured. The
maximum length is 32 characters.
639