D-Link DGS-1510 Series Reference Manual page 344

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
delay-time SECOND
Default
By default, JWAC redirect to the JWAC login page.
By default, the delay time is 1 second.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
When redirecting the quarantine server is specified, the unauthenticated host will be redirected to
quarantine server when it tries to access a random URL. When redirecting the JWAC login page is
specified, the unauthenticated host will be redirected to the JWAC login page in the switch to finish
authentication. When redirect is enabled, all Web access is redirected to the quarantine server or
JWAC login page. When redirecting to the quarantine server is specified, a quarantine server must be
configured first before enabling the JWAC function globally. When redirect is disabled, all Web access
is denied except for access to the quarantine server or JWAC login page.
Example
This example shows how to enable the JWAC redirect function.
Switch# configure terminal
Switch(config)# jwac redirect
Switch(config)#
This example shows how to configure the JWAC redirect destination to the Quarantine server.
Switch# configure terminal
Switch(config)# jwac redirect destination quarantine-serve
Switch(config)#
This example shows how to configure the JWAC redirect delay time to 5 seconds.
Switch# configure terminal
Switch(config)# jwac redirect delay-time 5
Switch(config)#
40-11 jwac system-auth-control
This command is used to enable the JWAC function globally on the switch. Use the no form of this
command to disable the JWAC function globally on the switch.
jwac system-auth-control
no jwac system-auth-control
Parameters
None.
Default
By default, this option is disabled.
(Optional) Specifies the time period after which the unauthenticated
host will be redirected. This unit is in seconds. The range is from 0
to 10 seconds.
341