D-Link DGS-1510 Series Reference Manual page 474

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Switch# configure terminal
Switch(config)# interface eth1/0/1
Switch(config-if)# power-saving shutdown time-range off-duty
Switch(config-if)#
54-7 show power-saving
This command is used to display the power saving configuration information.
show power-saving [link-detection] [dim-led] [port-shutdown] [hibernation] [eee]
Parameters
link-detection
dim-led
port-shutdown
hibernation
eee
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
If no optional keywords were specified, all power saving configuration information will be displayed.
Example
This example shows how to display all power saving configuration information.
Switch#show power-saving
Function Version: 3.00
Link Detection Power Saving
State: Disabled
Administrative Dim-LED
State: Disabled
Scheduled Dim-LED Power Saving
State: Disabled
Scheduled Port-shutdown Power Saving
State: Disabled
EEE_Enabled Ports
eth1/0/1
Switch#
(Optional) Specifies to display the link detection state.
(Optional) Specifies to display the dim LED state.
(Optional) Specifies to display the port shutdown state.
(Optional) Specifies to display the hibernation state.
(Optional) Specifies to display the EEE state.
471