D-Link DGS-1510 Series Reference Manual page 597

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
higher priority. The new priority setting will be saved in individual switch units when the user saves the
configuration.
Example
This example shows how to configure the priority of the switch unit 2 to 10.
Switch# stack 2 priority 10
Switch#
66-4 stack preempt
This command is used to enable preemption of the master role to come into play when a unit with a
better priority is added to the Switch later. Use the no form of this command to disable preemption.
stack preempt
no stack preempt
Parameters
None.
Default
By default, this option is enabled.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
When this command is disabled, the unit that assumes the master role will not change when units with
a better priority are added to the stack. If this command is enabled, then the unit that assumes the
master role will change as units with a better priority are added to the stack.
Example
This example shows how to enable preemption.
Switch# stack preepmt
Switch#
66-5 snmp-server enable traps stack
This command is used to enable sending of stacking related traps. Use the no form of this command
to disable sending of stacking related traps.
snmp-server enable traps stack
no snmp-server enable traps stack
Parameters
None.
Default
By default, this option is disabled.
594