D-Link DGS-1510 Series Reference Manual page 662

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Switch# configure terminal
Switch(config)# voice vlan mac-address 00-02-03-00-00-00 FF-FF-FF-00-00-00
description User1
Switch(config)#
76-5 voice vlan mode
This command is used to enable the automatic learning of the port as voice VLAN member ports. Use
the no form of this command to disable the automatic learning.
voice vlan mode {manual | auto {tag | untag}}
no voice vlan mode
Parameters
manual
auto
tag
untag
Default
By default, this option is set to untag and auto.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to configure automatic learning or manual configuration of voice VLAN member
ports.
If auto-learning is enabled, the port will automatically be learned as a voice VLAN member. This
membership will be automatically be aged out. When the port is working in the auto tagged mode
and the port captures a voice device through the device's OUI, it will join the voice VLAN as a tagged
member automatically. When the voice device sends tagged packets, the switch will change its
priority. When the voice device sends untagged packets, it will forward them in port's PVID VLAN.
When the port is working in auto untagged mode, and the port captures a voice device through the
device's OUI, it will join the voice VLAN as an untagged member automatically. When the voice
device sends tagged packets, the switch will change its priority. When the voice device sends
untagged packets, it will forward them in voice VLAN.
When the switch receives LLDP-MED packets, it checks the VLAN ID, tagged flag, and priority flag.
The switch should follow the tagged flag and priority setting.
If auto learning is disabled, the user should use the switchport hybrid vlan command to configure
the port as a voice VLAN tagged or untagged member port.
Example
This example shows how to configure physical port eth1/0/1 to be in the auto tag mode.
Specifies that voice VLAN membership will be manually configured.
Specifies that voice VLAN membership will be automatically
learned.
Specifies to learn voice VLAN tagged members.
Specifies to learn voice VLAN untagged members.
659