D-Link DGS-1510 Series Reference Manual page 410

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
47-20 show ipv6 mld snooping statistics
This command is used to display MLD snooping statistics information on the Switch.
show ipv6 mld snooping statistics {interface [INTERFACE-ID] | vlan [VLAN-ID]}
Parameters
interface INTERFACE-ID
vlan VLAN-ID
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays the MLD snooping related statistics information.
Example
This example shows how to display MLD snooping statistics information.
Switch# show ipv6 mld snooping statistics interface
Interface eth4/0/1
Rx: V1Report 1, v2Report 2, Query 1, v1Done 2
Tx: v1Report 1, v2Report 2, Query 1, v1Done 2
Interface eth4/0/3
Rx: V1Report 0, v2Report 0, Query 0, v1Done 0
Tx: v1Report 0, v2Report 0, Query 0, v1Done 0
Interface eth4/0/4
Rx: V1Report 3, v2Report 0, Query 3, v1Done 0
Tx: v1Report 2, v2Report 2, Query 1, v1Done 2
Total Entries: 3
Switch# show ipv6 mld snooping statistics vlan 1
VLAN 1 Statistics:
Rx: V1Report 3, v2Report 0, Query 3, v1Done 0
Tx: v1Report 2, v2Report 2, Query 1, v1Done 2
Total Entries: 1
Switch#
Specifies the interface of which to display the port statistics counter.
Specifies the VLAN of which to display the VLAN statistics.
407