D-Link DGS-1510 Series Reference Manual page 254

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
If URL is not specified, the current directory is used. By default, the current directly is located at the
root of the file system located at local flash. The storage media is mounted in the file system and
appears to the user as a sub-directory under the root directory.
The supported file systems can be displayed as the user issues the dir command for the root
directory. The storage media that is mapped to the file system can be displayed by using the show
storage media command.
Example
This example shows how to display the root directory in a standalone switch.
Switch# dir /
Directory of /
1 d--
2 d--
0 bytes total (0 bytes free)
Switch#
29-4 mkdir
This command is used to create a directory under the current directory.
mkdir DIRECTORY-NAME
Parameters
DIRECTORY-NAME
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to make a directory in the current directory.
Example
This example shows how to create a directory named "newdir" under the current directory.
Switch# mkdir newdir
Switch#
29-5 more
This command is used to display the contents of a file.
more FILE-URL
Parameters
0 Jun 31 2013 17:49:36
0 Jun 31 2013 18:42:53
Specifies the name of the directory.
251
c:
d: