D-Link DGS-1510 Series Reference Manual page 380

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
show lldp traffic
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
The global LLDP traffic information displays an overview of neighbor detection activities on the Switch.
Example
This example shows how to display global LLDP traffic information.
Switch#show lldp traffic
Last Change Time
Total Inserts
Total Deletes
Total Drops
Total Ageouts
Switch#
Display Parameters
Last Change Time
Total Inserts
Total Deletes
Total Drops
Total Ageouts
43-26 show lldp traffic interface
This command is used to display the each physical interface's LLDP traffic information.
show lldp traffic interface INTERFACE-ID [, | -]
Parameters
INTERFACE-ID
,
: 7958183
: 7
: 0
: 0
: 0
The amount of time since the last update to the remote table in
days, hours, minutes, and seconds.
Total number of inserts to the remote data table.
Total number of deletes from the remote data table.
Total number of times the complete remote data received was not
inserted due to insufficient resources.
Total number of times a complete remote data entry was deleted
because the Time to Live interval expired.
Specifies the interface ID.
(Optional) Specifies a series of interfaces, or separate a range of
377