D-Link DGS-1510 Series Reference Manual page 22

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
2-12 show unit
This command is used to display information about system units.
show unit [UNIT-ID]
Parameters
UNIT-ID
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays information about the system modules. If no option is specified, then all of
units' information will be displayed.
Example
This example shows how to display the information about units on a system.
Switch#show unit
Unit
---- -------------------------------------------
1 No module description
Unit
---- ---------------------------------
1
Unit Memory
---- --------
1 DRAM
1 FLASH
Switch#
2-13 show cpu utilization
This command is used to display the CPU utilization information.
show cpu utilization
Parameters
None.
Default
None.
(Optional) Specify the unit to display.
Model Descr
Serial-Number
Total Used
---------- ----------
131072 K 66567 K
29937 K 7799 K
Model Name
------------------
DGS-1510-28P
Status
--------- -----------------
ok 0DT6H32M18S
Free
----------
64505 K
22138 K
19
Up Time