D-Link DGS-1510 Series Reference Manual page 342

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
None.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
This command allows you to configure the URL of the Quarantine Server. If redirection is enabled and
the redirection destination is the Quarantine Server, when an HTTP request from an unauthenticated
host is received which is not headed to the Quarantine Server, the switch will handle this HTTP
packet and send back a message to the host to make it access Quarantine Server with the configured
URL. When the PC is connected to the specified URL, the quarantine server will request the PC user
to input the username and password to authenticate.
Example
This example shows how to configure the JWAC quarantine server URL to be
"http://10.90.90.88/authpage.html".
Switch# configure terminal
Switch(config)# jwac quarantine-server url ipv4 http://10.90.90.88/authpage.html
Switch(config)#
This example shows how to configure the JWAC quarantine server URL to be
"http://[3000::2]/authpage.html".
Switch# configure terminal
Switch(config)# jwac quarantine-server url ipv6 http://[3000::2]/authpage.html
Switch(config)#
40-8 jwac quarantine-server monitor
This command is used to enable the JWAC Quarantine server monitor function. Use the no form of
this command to revert to the default setting.
jwac quarantine-server monitor
no jwac quarantine-server monitor
Parameters
None.
Default
By default, this option is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
When the JWAC Quarantine server monitor feature is enabled, the JWAC switch will monitor the
Quarantine server to ensure the server is OK. If the switch detects no Quarantine server, it will
redirect all unauthenticated HTTP accesses to the JWAC Login Page if the redirect option is enabled
and the redirect destination is configured to be Quarantine server.
Example
339