D-Link DGS-1510 Series Reference Manual page 567

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Switch# configure terminal
Switch(config)# snmp-server engineID local 332200000000000000000000
Switch(config)#
63-18 snmp-server group
This command is used to configure an SNMP group. Use the no form of this command to remove a
SNMP group or remove a group from using a specific security model.
snmp-server group GROUP-NAME {v1 | v2c | v3 {auth | noauth | priv}} [read READ-VIEW]
[write WRITE-VIEW] [notify NOTIFY-VIEW] [access IP-ACL-NAME]
no snmp-server group GROUP-NAME {v1 | v2c | v3 {auth | noauth | priv}}
Parameters
GROUP-NAME
v1
v2c
v3
auth
noauth
priv
read READ-VIEW
write WRITE-VIEW
notify NOTIFY-VIEW
access IP-ACL-NAME
Default
Group
Name
Initial
ReadGroup
ReadGroup
WriteGroup
WriteGroup
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
Specifies the group name of a maximum of 32 characters. The
syntax is general string that does not allow space.
Specifies that the group user can use the SNMPv1 security model.
Specifies that the group user can use the SNMPv2c security model.
Specifies that the group user can use the SNMPv3 security model.
Specifies to authenticate the packet but not encrypt it.
Specifies not to authenticate and not to encrypt the packet.
Specifies to authenticate and encrypt the packet.
(Optional) Specifies a read-view that the group user can access.
(Optional) Specifies a write-view that the group user can access.
(Optional) Specifies a write-view that the group user can access.
The notify view describes the object that can be reported its status
via trap packets to the group user.
(Optional) Specifies the standard IP access control list (ACL) to
associate with the group.
Version Security
Level
SNMPv3 noauth
SNMPv1 noauth
SNMPv2c noauth
SNMPv1 noauth
SNMPv2c noauth
Read View
Name
Restricted
CommunityView
CommunityView
CommunityView
CommunityView
564
Write View Notify View
Name Name
None Restricted
None CommunityView
None CommunityView
CommunityView CommunityView
CommunityView CommunityView